Special Tube Former SBTF-1602

Spiral Tubeformer, also known as spiral seam thin-walled pipe, is a machine used to produce spiral air ducts. SBTF-1602 can produce spiral pipes with a maximum diameter of 1600mm.

Inquiry

Overview
Parameter
Inquiry
Related Products

The maximum specification of the spiral air duct produced inSBTF-1602 is only 1600. However, the quality of the product is the same asSBTF-2020 and can meet the standards of DIN, BS, Euroorm, and Smacna.This machine will cut pipes into preset lengths and the required number of pieces using a cutter or plasma.The cutting blade enjoyed has the characteristics of no noise, no heat sparks generated by the cutting edge, and no tilting of the cutting edge.

Technical Data
Diameter	φ80-1600mm （φ3”-62”）
Thickness	Galvanised Steel 0.4-1.3mm (27-18Ga) Stainless steel 0.4-0.8mm (27-23Ga) Aluminium 0.4-1.3mm (27-18Ga) Other profiles on request.



Width	Standard 137mm 0.4-1.0mm(27-20Ga) Standard 140mm 1.1-1.3mm(19-18Ga) Other profiles on request.


Corrugations	Either one or two beads.（Optional）
Lockseam	Outside lock, inside lock as request.
Cutting System	The patented flying slitter.
Options	Atutomatic length control system. Controlled corrugation unit, flange slitter

Power	Mainframe 11KW Cooling water pump 0.25KW

Weight	2900Kg
Dimension	2000mm×1700mm×1450mm(Mainframe) 2000mm×1100mm×1300mm(Decoiler) 2450mm×1200mm×1200mm(Run-out table)


Voltage	380V/50HZ/3PH